 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Exposure and development
|
|
If you are accustomed to Kodak HIE film, expose and develop this 120/220 film just as you normally would. Just as with Kodak HIE this film lacks an anti-halation backing layer that results in the familiar glowing highlights. This film will produce the same excellent results, with the added benefits of having a much larger negative.
|
|
If you are unfamiliar with Kodak HIE film, refer to: http://kodak.com/global/en/professional/support/techPubs/f13/f13.pdf
|
|
|
Also, here are a few tips that you may find useful
|
|
|
• For a stronger IR effect, use a Kodak Wratten filter 89B, 87 or 87C instead of a 25 or 29. These black opaque filters will provide a stronger infrared look to your images with enhanced contrast and glowing highlights. The red filters allow for more film speed, less contrast and dramatic effect. Wedding and portrait photographers often prefer red filters to black.
|
|
• When using one of the black opaque filters, if possible, attach the filter to the front of the camera back itself. This is equivalent to putting it between the film rails on a 35mm camera. The advantage to this is that it will allow for focusing and composition through the viewfinder as normal and also keeps the filter clean.
|
|
|
 |
|
 |
|
 |
|
|
• Experiment with your flash. Electronic flash tubes emit more energy in the infrared region than any other, making it perfectly suited for IR photography. It should only require one roll of film to determine the best flash setting for your typical scene. Expect a little less contrast when using a flash. Also keep in mind that according to Kodak there is some reciprocity failure at exposures of 1/1000 sec (and shorter). Common electronic flash pulses last for only a very short period of time (1/500-1/10, 0000 sec).
|
|
Guarantee and limit of Liability I am a photographer myself and have looked forward to using this film for a long time. It has taken me nearly a year to develop and build the cutting and rolling machines. I have made every effort to ensure that the film I sell is free of defects, whether they be Kodak’s fault or my own. My procedures of cutting and rolling are done meticulously to prevent dust marks, scratching, fogging and light leaks. However, I do not offer any guarantee regarding this.
|
|
This film is not being marketed or sold as a Kodak product
|
|
Purchasing film from me constitutes an AGREEMENT by you to waive any claims for any damages or loss by myself or others even though due to the negligence or other fault by myself or others. The acceptance of the film is without warranty or liability, and recovery for any incidental or consequential damages is not allowed. This claim is extended to include fogging caused by X-Ray or other phenomenon whether by intent or accidental during shipping or otherwise.
|
|
TIPS/ADVICE FOR LOADING AND UNLOADING
|
|
Frequently asked questions PLEASE READ
|
|
ORDERING
|
|
|
|
|
|
|
|
|
|
|